First, why the washing machine does not run? The reason […]
First, why the washing machine does not run?
The reason why the washing machine does not run is that the contact is not good or the door is not closed. First, you can directly check the power plug to see if the Washer Motor is plugged and the washer motor is damaged. If it is because a plug, try again. If it is a motor, replace the washer motor, and then see if the door is closed, if it is, close it.
Second, why the water does not enter into the washing machine?
The main reason why the water does not enter into the washing machine is that the water pressure is unstable. The household connected to the washing machine with a water pipe should find that the water pressure is not enough when the washing machine does not enter the water. Then check whether the water inlet is blocked. The dedicated after-sales maintenance master went to the door and carefully screened it step by step. Then the coil is turned on. Because the coil is open, the voltage does not pull into the inside, and the water cannot flow in. Then the inlet valve must be replaced. Now replace the inlet valve, remove the inlet valve, and replace it. The inlet valve failure is eliminated.
Third, how does the washing machine's water intake stop when it reaches the preset?
The water level sensor has failed. Check if the hose is bent or bent to block the air. If the sensor can be fine-tuned normally, it can be half a clockwise.
Fourth, what is the reason that the fully automatic washing machine is not dehydrated?
(1) Please check if there is too much dehydrated clothing and exceed the rated dewatering capacity of the washing machine. If so, remove a small amount of clothing and then dehydrate it to solve.
(2) Please check if there is power in the power socket. If the socket is not powered, it is recommended to contact a professional electrician to repair the power socket and then use it.